How to Add a Lock to a Drawer
Cool How To Add A Lock To A Drawer Ideas. Make sure to put the key slot in a vertical position. His only request was if i could add a lock.
First, bend the pin back, so it gains a shape similar to an elongated metal wire. Bend the clip into an l shape, leaving a fold across the clip's shorter side. Using the nail clipper file.
Mount The Strike Plate Using Wood Screws And 1/4 (Or Appropriately Sized) Spacers To Bump It Up A Little From.
I cut the back of the drawer shorter, so that the bottom can. Now add the spring and rod to the magnet (i used their magnetic properties to keep them together without adhesive). It cannot be seen from the exterior of the drawer/cabinet.
Tools For Installation Include Wood Drill, Hand Hammer, Hand Saw, Screwdriver, Woodworking Chisel, Tape Measure And Other Tools.
The last thing to do is to connect the longer wire from. The parallel paperclip applying pressure against the lock cylinder will begin to move and you should allow the paperclip to. Make sure that the flat side faces upwards.
How Can We Open A Lock Without Key?
Be selective about what you choose. You can use a hasp between the drawer and frame to lock the. 8 steps to follow on how to add a lock to a desk drawer step one:
His Only Request Was If I Could Add A Lock.
Make sure you wear your earplugs and. Using the nail clipper file. The cursor turns into a.
On The Left Side Of The Drawer, You’ll Find A Metal Slide.
Test that the rod goes through and using the strong adhesive, stick the tube. Apply pressure using the tension wrench in a rotational fashion, depending on how the. The next thing you will need to do is remove any screws in place.
0 Response to "How to Add a Lock to a Drawer"
Post a Comment